How to budget Seedance 2.5 Flash from 7 cents a second
BytePlus bills the Flash tier by the video token at $7 per million, which works out to about $0.07 a second at 480p and $0.15 at 720p.

Key takeaways
- BytePlus's ModelArk price list, updated November 16, 2026, puts Dreamina Seedance 2.5 Flash at $7.0 per million video tokens for 480p and 720p, against $10.70 for flagship Seedance 2.5.
- The same page's worked example prices a 5-second 16:9 clip at $0.34 at 480p and $0.76 at 720p, the vendor's own $0.07 and $0.15 a second.
- Flash stops at 720p: BytePlus lists 1080p, 4K and offline inference as not supported for it, so 1080p and 4K delivery still needs the flagship.
- fal hosts the same model at roughly $0.1442 a second at 480p and $0.3094 at 720p, about double BytePlus's own rate.
Dreamina Seedance 2.5 Flash is now callable on ByteDance's own platform, and its list price is the clearest number in video generation this week: $7.0 per million video tokens. On BytePlus's own worked example that is $0.07 a second at 480p and $0.15 a second at 720p.
BytePlus, ByteDance's international cloud arm, opened the fast tier on its ModelArk API on November 15, 2026. The tier is cheap because it is bounded: 480p and 720p only, with 1080p, 4K and offline inference all marked "Not supported" on the price sheet. Budgeting the model means budgeting around that ceiling.
The number that trips people is the per-second figure itself. Seedance 2.5 Flash is billed by the video token, and the token count moves with resolution, duration and the inputs you attach, so a flat rate is an estimate rather than a meter. The vendor says so on the same page that publishes it.
What Seedance 2.5 Flash is
BytePlus announced Dreamina Seedance 2.5 Flash on November 12, 2026, and opened the API three days later. Its model ID carries the family name and the opening date in one string, dreamina-seedance-2-5-flash-261115, where 261115 reads as November 15.
The announcement calls it "results close to flagship Seedance 2.5, with nearly twice the generation speed." No timing behind that speed claim has been published, so treat "nearly twice" as the maker's number until someone outside BytePlus times a run.
Flash keeps the flagship's reach on clip length. BytePlus's documentation says it generates videos up to 30 seconds, and fal's hosted page for the same model describes "4 to 30 second video with native audio" at 480p or 720p. BytePlus's own video documentation lists the Seedance 2.5 series as producing video with audio or silent video. What Flash trades away is resolution: 480p and 720p only, with no 1080p or 4K.
What a second actually costs
BytePlus prices video generation by token, quoted per million tokens, and the rate for Seedance 2.5 Flash is $7.0 for the 480p and 720p bands. The page publishes the formula behind the bill:
token consumption = (input video duration + output video duration) × output width × output height × output frame rate ÷ 1024
Run the vendor's own example through it. A 5-second, 16:9 clip with no video input consumes roughly 48,600 tokens at 480p and about 108,600 at 720p. At $7.0 per million, that is the $0.34 and $0.76 the same page lists, or $0.07 and $0.15 a second.
Duration scales the bill linearly, so a 10-second clip costs about double the 5-second one: roughly $0.68 at 480p and $1.52 at 720p. The announcement rounds the 720p rate to "USD 0.152 per second, approximately 34% lower than Seedance 2.5," which matches the price page's own per-second examples: $0.231 on the flagship against $0.15 on Flash in the same 5-second, 16:9 test.
One billing rule is worth reading twice: BytePlus charges only for successfully generated videos, and applies no fee when generation fails for reasons such as content moderation. On a tier built for iteration, that covers the takes you throw away.
Where Flash stops
The ceiling is the whole budgeting decision. BytePlus's price table lists 1080p, 4K and offline inference as "Not supported" for Seedance 2.5 Flash, so the flagship retains the top of the ladder. On Seedance 2.5 the same 5-second example costs $0.103 a second at 480p, $0.231 at 720p and $0.569 at 1080p.
The reference budget shrinks too. BytePlus's documentation caps a Flash request at up to 10 images, 5 videos and 5 audio clips. The Seedance 2.5 launch post gives the flagship up to 50 multimodal references for a single clip. If your shot list leans on large reference sets, the cheaper tier will not carry it.
There is a separate meter for copyrighted material. BytePlus bills videos generated with copyrighted IPs by output duration, at a per-IP unit price on top of the token charge, so a clip built on licensed characters costs more than the rate card implies.
The reseller markup
BytePlus is not the only place to call Flash. fal lists the same model at roughly $0.1442 a second at 480p and $0.3094 a second at 720p, billed at $0.014 per 1,000 tokens. That token rate is $14 per million, twice BytePlus's $7.0, and the per-second numbers land at about double the vendor's too.
If your pipeline already routes through fal or another host, the markup is a real line in the budget. If you can call ModelArk directly, the same output costs half in tokens before anyone adds margin.
When to use Flash and when to pay for the flagship
Flash is the iteration tier. At $0.07 a second at 480p it is cheap enough to draft with: block motion, check composition, throw away the takes that do not work. A 5-second 480p draft on Flash costs $0.34.
The flagship is the delivery tier. The same 5-second clip at 1080p on Seedance 2.5 costs $2.843, and a 1080p flagship second runs $0.569 against $0.07 for a 480p Flash second, about eight times the rate. The workflow that keeps a bill down drafts at 480p on Flash and renders only the locked shots at 1080p on the flagship, rather than paying 1080p prices for a hundred ideas to find eight.
Flash is enough for 720p social cuts, internal review passes, shot selection and anything that will be compressed on delivery. You have to pay for the flagship for any 1080p or 4K master, and for large reference sets.
To use it, request access in the ModelArk console on the ap-southeast-1 region and activate the model; BytePlus's documentation requires a BytePlus balance above $30, an AI Savings Plan at the $30 tier or above, or a Seedance resource pack before Seedance 2.5 models will run. BytePlus's pages do not list which regions carry Flash, and its consumer page covers the flagship's rollout, not Flash, so check your own account region.
Sources
- ai.byteplus.com - BytePlus ModelArk token rates, worked clip examples, billing rules
- docs.byteplus.com - the same BytePlus price list on the global docs host
- ai.byteplus.com - Seedance 2.5 capabilities, 30-second clips, activation rules
- x.com - the Flash announcement: $0.152 a second, November 15 API date
- fal.ai - fal's hosted rate and its 4-to-30-second native-audio spec
- byteplus.com - the Seedance 2.5 line: 30-second clips, up to 50 references
- dreamina.capcut.com - the maker's consumer page for the Seedance 2.5 rollout